Resuming Operation - Panasonic CF-M34 series Reference Manual

Suspend/Hibernation Functions
NOTE
With the method below, you can shut down the computer by using the suspend
function.
Fn + F7 (
In [Start] - [Shut Down], select [Stand by].
With the method below, you can shut down the computer by using the hibernation
function.
In [Start] - [Shut Down], select [Hibernate].

Resuming Operation

Slide the power switch
When the computer enters the suspend or hibernation mode by the closing of the
LCD panel, it will resume when the LCD panel is opened. If the computer does not
resume when the LCD panel is opened, slide the power switch.
does not appear when the computer resumes from the suspend or hiber-
nation mode.
If you want to use the security function when using the suspend or hibernation mode,
add the check mark for [Prompt for password when computer goes off standby] in
[Control Panel] - [Power Options] - [Advanced].
CAUTION
After the display returns, the computer needs a short period of time to reinitialize.
This takes about 15 seconds. Do not shut down or restart Windows, or use
the suspend or hibernation functions again during this time, as this may sub-
sequently cause Windows to operate abnormally.
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
When operation resumes, serial devices such as a mouse, modem or PC
Cards may not function properly. In such cases, you will need to restart your
computer or reinitialize the individual devices.
Avoid the following until the computer is completely turned off when powering
down using the suspend or hibernation functions, or resuming operation by
pressing the power switch from the suspend or hibernation.
• Touch the keyboard (excluding password input), touchscreen, touch pad, or
power switch.
• Connect or disconnect the AC adapter.
• Close the display.
When a password has been set in the Setup Utility,
computer powers on, but
from the suspend or hibernation mode.
page 4)
does not appear when the computer resumes
13
appears when the