Panasonic CF-T2 Series Reference Manual page 31

Security Measures
Setting the User Password (enabling, changing, disabling)
NOTE
When the Supervisor Password has not been set, the User Password can not be set.
Set the Supervisor Password if you have not done so. (
To disable the User Password, start up the Setup Utility with the Supervisor Password.
1
Run the Setup Utility. (
2
Using either
3
Using either
4
Only when the User Password has been set:
Enter your password at [Enter Current Password] and press
5
Enter your password at [Enter New Password] and press
To disable the User Password
Press only Enter.
6
Re-enter your password at [Confirm New Password] and press
Enter
.
To disable the User Password
Press only Enter.
7
At [Setup Notice], press
8
F10
Press and select [Yes], then press
CAUTION
Do not forget your password. If a password is forgotten, you will be unable to use your
computer. If this happens, ask a person who knows the Supervisor Password.
When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
page 79)
or , select [Security].
or , select [Set User Password] and press
Enter
.
31
page 29)
Enter
Enter
Enter
.
.
Enter
.
.