Port Os Control; Restore Default Values; Usb Reset - ATEN CS1798 User Manual

Port OS Control

A port's operating system can be changed to match that of the computer
attached to the port. To change a port's operating system, key in the following
hotkey combination:
1. Invoke HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Key in [Function], where [Function] refers to one of the function keys in
the following table:
After pressing a function key you automatically exit HSM.

Restore Default Values

This administrator only hotkey restores the CS1798 / CS17916 default values.
See ?$paratext>? on page 74. To restore the default values, key in the
following hotkey combination:
1. Invoke HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [R].
3. Press [Enter].
After you press [Enter], the command line displays RESET TO DEFAULT
SETTING for three seconds; then the message disappears and you
automatically exit HSM.

USB Reset

If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 47).
2. Press and release [F5].
Key Description
F1 Sets the Port OS to Windows
F2 Sets the Port OS to Mac
F3 Sets the Port OS to Sun
5. Hotkey Operation
53