CL6708MW User Manual
Port OS Control
A port's operating system can be changed to match that of the computer
attached to the port. To change a port's operating system, key in the following
hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12]
combination.
2. Key in [Function], where [Function] refers to one of the function keys in
the following table:
After pressing a function key you automatically exit Hotkey mode.
Set USB Speed
Users could use the hotkey to set USB speed of the selected KVM port as low/
full speed to compliant with the connected computers.
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12]
combination.
2. Press [F11][L]/[F11][F]
3. Press [Enter].
[L] Indicates the selected KVM port set as USB low speed.
[R] Indicates the selected KVM port set as USB full speed.
If users need to set all KVM ports of the selected KVM station, the hotkey
commands should be [F11][L][A], [Enter]/[F11][F][A], [Enter].
48
Key
Description
F1
Sets the Port OS to Windows
F2
Sets the Port OS to Mac
F3
Sets the Port OS to Sun