Port Os Control; Set Usb Speed - ATEN CL5708 User Manual

CL5708 / CL5716 User Manual

Port OS Control

A port's operating system can be changed to match that of the computer
attached to the port. To change a port's operating system, key in the following
hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12]
combination.
2. Key in [Function], where [Function] refers to one of the function keys in
the following table:
After pressing a function key you automatically exit Hotkey mode.

Set USB Speed

Users can use hotkeys to set the USB speed of the selected KVM port to low/
full speed to comply with the connected computers.
1. Invoke Hotkey mode (see Invoke Hotkey Mode on page 44).
2. Press [F11]
3. Key in [Function], where [Function] refers to one of the function keys in
the following table:
Key
L
F
4. Press [Enter].
To set all KVM ports of the selected KVM station, add an [A] after the function
key: Under Hotkey mode, press [F11][L][A][Enter] or [F11][F][A][Enter].
50
Key Description
F1 Sets the Port OS to Windows
F2 Sets the Port OS to Mac
F3 Sets the Port OS to Sun
Description
Set the KVM port to low speed USB
Set the KVM port to full speed USB