Table of Contents
Advertisement
Clearing House Codes: The House Codes memorised can be deleted (i.e. the Ei262 can be uncoded)
by pressing and holding the House Code switch on for about 6 seconds. The red RadioLINK Indicator
light comes on solidly, then flashes rapidly (alternating with the green light if on mains power) and stops.
Release the House Code switch. The Ei262 has now been returned to the default factory setting.
Audible Alarm
Self Diagnostics
Sensor
Rechargeable
Lithium Cells:
Tamperproof
Wireless Interconnect
Hardwired Interconnect : Up to 12 Ei262 CO Alarms can be interconnected, so that when one
: 85dB(A) minimum @ 3m
: Horn beep and amber fault light flashes every 40 seconds if a sensor fault is found.
: Fully charged cells can power unit in standby for over 2 weeks and without
mains power, it can power the unit in alarm for over 2 hours. The unit
beeps every 40 seconds if cells are depleted.
: Screwdriver needed to release from mounting plate. Additionally a tamper-
proofing screw can be fitted to the mounting plate.
: Up to 12 Ei262 CO Alarms can be interconnected, so that when one
senses CO, all alarm. Alternatively, up to a combined total of 12 Ei262 CO
Alarms and Ei161RC/Ei164RC/Ei166RC/Ei2110 Smoke/Heat/Fire Alarms
(on Ei168RC RadioLINK Professional bases) can be interconnected
provided that an Ei411H Remote Control switch is used.
senses CO, all alarm. Alternatively, up to a combined total of 12 Ei262 CO
Alarms and Ei161RC/Ei164RC/Ei166RC/Ei2110/Ei261RC Smoke/Heat/Fire
Alarms can be interconnected provided that an Ei1529RC Remote Control
switch is used.
31
Advertisement
Table of Contents
