Identifying Disk Drive Modules - IBM 2104 TU3 Operator's Manual

Identifying Disk Drive Modules

You can identify a disk drive module by the serial number that appears on a label
1 on the front of the module:
Figure 14. Disk Drive Module Label
This label also shows the size of the disk drive.
Each disk drive module also has a SCSI address that is related to its position in the
2104.
The addresses used are 0, 1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 12, 13 and 14. These addresses
are usually assigned, in sequence, from left to right in the 2104 Model DU3 and
from top to bottom in the 2104 Model TU3.
19
Chapter 1. Using the 2104 Model DU3 or TU3