Wiring Harness On The Radio Receiver - BMW 84 64 0 441 949 Installation Instructions Manual

6. Wiring harness on radio receiver
J
A2
X13812
A4
1
A5 2
© BMW AG, Munich
A3
A1
082 0086 Z
A4
X13815 X13812
087 0637 Z
A5
X13812
087 0654 Z
01 29 2 210 822
Disconnect the following cables from plug X13812
(SW 16-pin) of the radio receiver and connect to socket
casing J:
- Cable, RT/GN cable, from PIN 15
to socket casing J PIN 1
- Cable, BR cable from PIN 12
to socket casing J PIN 2
Connect branches A1 and A2 to plug X13812 as
follows:
- Branch A1, RT/GN cable, to PIN 15
- Branch A2, BR cable, to PIN 12
Connect branch A3 to socket casing J.
Unclip fibre optic cable casing X13815 (SW 2-pin) from
plug X13812 (SW 16-pin) of the radio receiver.
Disconnect the outgoing fibre-optic cable from fibre-optic
cable casing X13815 PIN 2 and connect branch A4,
OR cable.
Clip fibre-optic cable casing X13815 into plug X13812.
Unlock the fibre-optic cable connector (1) on branch A5
and connect the disconnected fibre optic cable (2).
Connect plug X13812 (SW 16-pin) to the radio receiver.
4/2011 (Z/Z) 10