Advertisement
5.
Installing and connecting the retrofit wiring harness
X11003
A6
E
A1-A4
A12-A15
X14261
D
X14260
A9-A10
1
A7-A8
© BMW AG, Munich
1
A5
071 0241 Z
F22
F25
1
071 0242 Z
1
A7-A11
2
071 0245 Z
071 0243 Z
01 29 2 320 769
Connect branches A5–A6 as follows to plug X11003
(SW 6-pin) on the front fuse holder:
- Branch A5, GE/SW cable, to PIN 5
- Branch A6, GE/RT cable to PIN 2
Insert blade terminal fuses E into slots F22 and F25 of the
front fuse holder (1).
Route branches A1–A4 and A7–A15 as follows along
the standard wiring harness:
- Branches A1–A4 through the rubber grommet (1) into
the engine compartment and onward into the right
wheel arch
- Branches A7–A15 into the right footwell
- Branches A12–A15 through the rubber grommet (2)
into the engine compartment and onward into the left
wheel arch
In cars built up to 10/10, the footwell module (1)
must be renewed.
Connect branches A7–A10 as follows on footwell
module (1):
- Connect branch A7, WS/BL cable, to PIN 3 of
plug X14260
- Connect branch A8, WS/GN cable, to PIN 37 of
plug X14261
- Connect branches A9–A10, GR/BR cable, with minia-
ture connector D to GR/BR cable from PIN 49 of
plug X14261
05/2012
(T/Z/Z)
8
Advertisement
