BMW 84 64 0 441 949 Installation Instructions Manual page 11

7. 7. Installing and connecting the combox Installing and connecting the combox
U3-U6
A7
D
1
1
I/H
© BMW AG, Munich
T S
090 1559 Z
090 1558 Z
E
I/H
090 1574 Z
E
D
090 1575 Z
01 29 2 210 822
Only when installing the basic Bluetooth hands-
free kit with USB/audio interface retrofit kit
Connect branches U3–U6 as follows to 26-pin socket
casing T:
- Branch U3, shield, to PIN 22
- Branch U4, WS/GN cable, to PIN 10
- Branch U5, WS/RT cable, to PIN 24
- Branch U6, VI cable, to PIN 23
- Slide cover cap S onto socket casing T and connect to
combox D.
All cars
Disconnect the cables as follows from branch A7 and
connect to socket casing T:
- From PIN 1 to PIN 25
- From PIN 19 to PIN 12
- From PIN 21 to PIN 11
- From PIN 36 to PIN 14
- From PIN 17 to PIN 1
Only cars without cup holders in the dashboard
The 26-pin connection (1) must point in the
direction shown.
Screw combox D using hexagon screws H and hexagon
nuts I to combox mount E.
Only cars with cup holders in the dashboard
The 26-pin connection (1) must point in the
direction shown.
Secure combox D using hexagon screws H, hexagon nuts
I and two cable ties L to combox mount E.
L


4/2011 (Z/Z) 11