To Install And Connect The Wiring Harness - BMW 84 64 0 398 228 Installation Instructions Manual

5.

To install and connect the wiring harness

A1-A4 + A12-A15
A8-A11
A7
L
A10
A11
© BMW AG, München
A
A5
A6
090 0141 Z
A9
A8
090 0133 Z
090 0134 Z
X14255
087 0028 Z
Route the wiring harness A from the installation
site of the universal charger/electronic hands-
free control module.
Secure branches A5 – A7 to the standard wiring
harness using a cable tie L.
Route branches A8 – A11 to the side trim in the
boot.
Route branches A1 – A4 and A12 – A15 to the
left-hand side of the car.
Connect branches A8 and A9 together.
Tie back branches A8 – A10 to the left side trim
in the boot using a cable tie L.
Route branch A11 along the standard wiring
harness to the roof aerial.
Release the main distributor station X14255
behind the left backrest side section.
Remove the cap from the distributor station.
01 29 0 401 236
02.2005 (Z/Z) 8