Konica Minolta DI183 User Manual page 39

Before Making Copies
No. Part Name
7 Erase key
8 Finishing key
9 File Margin key
10 X/Y Zoom key
11 Job Recall key
12 Bypass Tray Size
Select key
13 Zoom ([
14 Display
15 10-Key Pad
16 Access key
17 Energy Saver key
18 Interrupt key
19 Panel Reset key
20 Clear key
21 Stop key
22 Start key
23 Enter key
24 Zoom key
25 Auto Paper/Auto Size
key
26 Paper key
27 Auto/Photo key
Di152/Di183
Description
• Press to select the erase position.
• Press to select the finishing function.
• Press to select the File Margin mode.
• Press to make a copy with different zoom ratios set for
X (horizontal) and Y (vertical) directions.
• Press to recall either one of the two jobs previously
stored in memory.
• Press to select the size of the paper loaded in the
Bypass Tray.
][ ]) key • Press to change the zoom ratio in the range between
50% and 200% in 1% increments.
• What is shown on the Display changes from the number
of copies to be made to the zoom ratio.
• Shows the number of copies to be made, the zoom
ratio, and other setting data.
• Use to type in the number of copies to be made and any
other numeric data.
• Press when entering an account number.
• Becomes valid only when Copy Track has been set.
• Press to set the copier into the Energy Saver mode.
• Press to interrupt a copy job.
• Press to reset all copy functions and settings to their
defaults.
• Holding down the key for 3 seconds or more will set the
copier into the Utility mode.
• Press to reset the number of copies to "1."
• Press to stop a print cycle.
• Press to stop a scanning sequence.
• Press to start a scanning sequence.
• Press to start a print cycle.
• Press to validate the setting just made.
• The key lights up green when the copier is ready to
make copies, orange when it is not ready to make
copies.
• Press to validate the setting just made.
• Press to select a zoom ratio from among those fixed
ratios available as standard.
• Press to select either Auto Paper or Auto Size.
• Press to select the paper size
• Press to adjust the image density of the copy.
3
.
3-13