Messages - Yamaha Portable Grand DGX-660 Owner's Manual

Messages

LCD Message
Access error!
Clearing all memory...
Data Error!
File information area is not large enough.
File is not found.
File too large. Loading is impossible.
Media capacity is full.
Memory Full
MIDI receive buffer overflow.
Over Current
Save OK ? [YES]/[NO]
Save data is not found.
Since the media is in use now, this function
is not available.
Since the recorded song has not been
saved, the operation cannot be performed.
The limit of the media has been reached.
The media is not formatted.
The media is write-protected.
The notation cannot be displayed, since
this song is not allowed to display the
notation.
The song data is too large to be converted
to notation.
The number of files exceeds the system
limit. Delete existing files to add new ones.
This drive is busy now.
This function is not available now.
NOTE
• Not all the messages are listed in the table; only messages needing explanation are included.
Indicates the failure in reading or writing from/to the media or the flash memory.
Displayed while erasing all data in the flash memory. Never turn the power off during
data transmission.
Displayed when the Song or Style contains illegal data.
Indicates that saving data in the media cannot be executed since the total number of
files have become too many.
Indicates there is no file.
Indicates that loading data cannot be executed since the file data is too large.
Displayed when saving data cannot be executed since the media memory has
become full.
Displayed when the internal memory becomes full during Song recording.
Displayed when too much MIDI data was received at one time and failed to proceed.
Communication with the USB device has been shut down because of the overcurrent
to the USB device. Disconnect the device from the USB TO DEVICE terminal, then
turn on the power of the instrument.
Confirms whether saving is executed or not. Press the [+] (YES) button to save the
recorded Song. To cancel saving, press the [-] (NO) button at the prompt.
Displayed when the data to be saved doesn't exist.
Indicates that the file control function is currently unavailable since the media is being
accessed.
This message appears if you attempt to convert the User Song to audio file when
there is any recorded Song which is not saved. When this message appears, press
the [EXIT] button to exit from the FILE CONTROL display, then save the recorded
Song which is not saved. To save the Song, hold down the [REC] button until the
save confirmation message appears, then press the [+] (YES) button.
Indicates that saving data cannot be executed since the folder/directory structure has
become too complicated.
Indicates the inserted media has not been formatted.
Indicates that the inserted media cannot be written since it is write-protected. Set to
the write-protect switch to the "overwrite" position before use.
This message will appear if you attempt to display the score of a Song for which
score display is prohibited.
Indicates that the score cannot be displayed since the Song data is too large.
Indicates that saving data cannot be executed since the total number of files exceeds
the capacity.
This message appears when processing lags behind Audio playback or recording.
Indicates the designated function is not available since the instrument is executing
another job.
Comment
DGX-660 Owner's Manual
89