Connecting A Microphone And Singing Along With Your Performance; Connecting A Microphone - Yamaha Portable Grand DGX-660 Owner's Manual

Connecting a Microphone and Singing Along with Your Performance

By connecting a microphone to the MIC INPUT jack (standard 1/4" phone jack), you can
enjoy singing along with your keyboard performance or with Song playback. The
instrument outputs your vocals through the built-in speakers. You can enjoy the three
preset settings by just selecting one of them according to the particular circumstances
and your personal preferences, or you can create your own desired settings and save
them.

Connecting a Microphone

1
Before turning on the power of the
instrument, set the MIC VOLUME knob
to the minimum position.
2
Connect a microphone to the MIC INPUT
jack.
NOTE
• Make sure to use a conventional dynamic microphone.
3
Turn on the power of the instrument.
4
Press the [MIC SETTING] button once or
twice to call up the MIC SETTING 1 dis-
play.
1 2
5
Select "MIC" by using the CATEGORY
[r] or [f] button, then set it to "ON"
by rotating the dial.
MIC ON/OFF
6
(If necessary, turn on the microphone.)
Adjust the MIC VOLUME knob while
singing into the microphone.
Adjust the MIC VOLUME knob so that the
INPUT LEVEL meter is not off the scale (or
"pinned" continuously to the right). If the INPUT
LEVEL meter is off the scale, distortion may be
produced.
Disconnecting the microphone
Set the MIC VOLUME knob to the minimum posi-
tion then disconnect the microphone from the MIC
INPUT jack.
NOTE
• You can assign the function of switching the MIC ON/OFF
to pedals. Refer to "Assigning specific functions to the
pedal" (page 21).
INPUT LEVEL
DGX-660 Owner's Manual
69