Voice Settings; Selecting A Dual Voice; Selecting A Split Voice; Voice Editing - Yamaha Portable Grand DGX-660 Owner's Manual

Voice Settings

Selecting a Dual Voice

1
Hold down the [DUAL ON/OFF] button
for longer than a second to call up the
"VOICE SELECT (DUAL)" display.
Hold for longer
than a second.
Current Dual Voice
2
Rotate the dial to select the desired Dual
Voice.

Selecting a Split Voice

1
Hold down the [SPLIT ON/OFF] button
for longer than a second to call up the
"VOICE SELECT (SPLIT)" display.
Hold for longer
than a second.
Current Split Voice
2
Rotate the dial to select the desired Split
Voice.
60
DGX-660 Owner's Manual

Voice Editing

For each of the Main, Dual and Split Voices, you can
edit the parameters such as volume, octave and depth
of the Reverb and Chorus, allowing you to create new,
custom sounds that best suit your musical needs.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [r] or [f] buttons
to call up the desired item.
Main Voice parameters are indicated as "Main
***," Dual Voice parameters as "Dual ***," and
Split Voice parameters as "Split ***." For infor-
mation about each parameter, refer to the Function
List on .
page 73
3
Rotate the dial to set the value.
Check the sound by playing the keyboard.
4
Repeat Steps 2–3 above to edit various
parameters.
5
If necessary, memorize the settings to
the Registration Memory (page 50).
The Voice-related settings are reset when a differ-
ent Voice is selected. If you want to store the cre-
ated sound for future recall, memorize the settings
to the Registration Memory.