Adding Harmony - Yamaha Portable Grand DGX-660 Owner's Manual

Adding Harmony

You can add harmony notes to the Main Voice.
1
Press the [HARMONY ON/OFF] button to
turn Harmony on.
Appears when Harmony is turned on.
Although turning on the Harmony will select a
Harmony Type suitable for the current Main
Voice, you can select a different Harmony Type.
2
Hold down the [HARMONY ON/OFF] but-
ton for longer than a second until "Har-
mony Type" appears on the display.
Current Harmony Type
3
Rotate the dial to select the desired Har-
mony Type.
For details, refer to the separate Data List.
The effect and operation differs depending on the
Harmony Type. Refer to the section below.
Try Playing a Variety of Instrument Voices
How to sound each Harmony Type
Harmony type 01 to 10, 13
Harmony type 11 (1+5) and 12 (Octave)
Harmony type 14 (Multi Assign)
Harmony type 15 to 18 (Echo)
Harmony type 19 to 22 (Tremolo)
Harmony type 23 to 26 (Trill)
Hold for longer
than a second.
You can adjust the Harmony Volume in the Function
Settings (page 74).
Press the right-hand keys while playing chords in the
auto accompaniment range of the keyboard when the
Auto Accompaniment is on (page 32).
Play the keys.
Both of the Main and Dual Voices should be turned on
when using the Multi Assign effect. The Main and
Dual Voices are alternately assigned to the notes in
the order you play them.
Play the keys.
Keep holding down the keys.
Hold down two keys.
DGX-660 Owner's Manual
31