Connecting A Usb Flash Drive - Yamaha Portable Grand DGX-660 Owner's Manual

Connecting a USB Flash Drive

1
Connect a USB flash drive to the USB
TO DEVICE terminal, being careful to
insert it with the proper orientation.
A message (information or confirmation dialog)
sometimes appears on the display to facilitate
operation. Refer to the "Messages" on page 89 for
an explanation of each message.
2
Wait for confirmation that the USB flash
drive has been properly mounted.
Mounting
(Flashing)
Mounted
(Lit)
USB Flash Drive Operations
Calling up the FILE CONTROL display
Pressing the [FILE CONTROL] button while the USB
flash drive is connected to the USB TO DEVICE termi-
nal calls up the FILE CONTROL display.
You can access file operations listed below by pressing
the CATEGORY [r] or [f] buttons from the FILE
CONTROL display.
Menu
Format
Regist Save
User Song Save
Audio Save
Load
USB Delete
User Delete
If you press the [FILE CONTROL] button while an
unformatted USB flash drive is connected to the instru-
ment, the "Format" function will automatically be
selected.
To exit from the FILE CONTROL display press the
[EXIT] button.
NOTE
• No sound will be produced if you play the keyboard
while the FILE CONTROL display is showing. Also, in
this state only buttons related to file functions will be
active.
NOTE
• The FILE CONTROL display will not appear in any of
the following cases:
• During Style, Song or Audio playback.
• During Lesson and Style Recommender.
• While data is being loaded from a USB flash
drive.
DGX-660 Owner's Manual
Reference page
82
83
84
85
86
87
87
81