Messages - Yamaha CLAVINOVA CVP-105 Service Manual

CVP-105

MESSAGES

General (Panel Operation)
This button can't be used during recording or playback!
This message appears when you try to perform operations which cannot be done during recording or playback, such as data conversion, etc.
Stop song recording or playback, or exit from the recording/playback mode, then perform the operation again.
This button can't be used during playback!
This appears when you try to execute operations that cannot be performed during playback, such as changing the number of repeats of the
Guide function.
Stop song playback, or exit from the playback mode, then perform the operation again.
This button can't be used while recording!
This message appears when you try to perform an operation (such as copying or deletion of song data) that cannot be performed in the Song
Record mode.
Stop recording, or exit the Song Record mode, then perform the operation again.
This button can't be used when ACMP ASSIST is on!
This message appears when you try to perform an operation (such as the selection of a style, etc.) that cannot be performed during
Accompaniment Assistance playback, or an operation (such as selection of a Guide Control function, etc.) that cannot be performed while
editing Accompaniment Assistance data.
Turn the Accompaniment Assistance function off, then perform the operation again.
Button not valid!
A button that does not have a function in the current mode has been pressed.
General (Direct Access)
Press a button to display corresponding settings.
This prompt appears when you press the [DIRECT ACCESS] button.
Press the panel button that corresponds to the settings you want to display. (Be sure to press the second button while this message is
showing.)
DIRECT ACCESS not available for this function!
This message appears if you press [DIRECT ACCESS] followed by a panel button that does not correspond to a Direct Access display.
Press [DIRECT ACCESS] again, then press a panel button that corresponds to a Direct Access display.
General (Disk-related)
No disk!
This prompt appears when there is no disk in the disk drive.
Put the proper disk in the drive and attempt the operation again.
No song!
When renaming the original song or converting the data this prompt will warn you in the event that there is no song data.
Select a data-containing song, or insert a disk with song data into the floppy disk drive.
No file!
This message appears if there is no Registration Memory, Micro Tuning, or related data on the currently inserted disk when you attempt a file-
related operation.
Create a file or insert a disk with a proper file.
No data to save!
This message appears if you try to save Accompaniment Assistance data to disk when no Accompaniment Assistance data has been recorded. It also
appears if you try to save a custom style to disk, but have selected a memory number that doesn't contain any style data.
Create some Accompaniment Assistance data or a custom style, or select a memory number that contains custom style data.
28