Yamaha Portable Grand DGX-660 Owner's Manual page 45

NOTE
• You can use the Metronome while recording although the met-
ronome sound will not be recorded. After pressing the [REC]
button, set the Time Signature and start Metronome before
going on to step 4.
4
Play the keyboard to start recording.
You can also start recording by pressing the
[START/STOP] button.
The current measure will be shown on the display
during recording.
5
After you finish performance, press the
[START/STOP] button or [REC] button to
stop recording.
When recording is stopped, a message asking if
you want to save the Song will appear.
or
NOTICE
• The recorded Song will be lost if you turn the power off
without executing the save operation.
6
7
Current measure
Recording Your Performance
Press the [+] (YES) button to save the
Song.
The Song will be stored as a MIDI file to Song
number 101–105. To cancel saving, press the [-]
(NO) button at the prompt.
NOTICE
• Never attempt to turn the power off when a "Now Writ-
ing..." message is shown in the display. Doing so can
damage the flash memory and result in a loss of data.
To hear the newly recorded perfor-
mance, press the [START/STOP] button.
NOTE
• If you press the [-] (NO) button once in response to the
confirmation message, you have the option of saving the
Song later until the power is turned off or another Song is
selected. To do this hold down the [REC] button until the
save confirmation message appears, then press the [+]
(YES) button.
Data that cannot be recorded to Songs
AUX IN sound, Microphone sound, Metronome
sound, Damper Resonance effect, Split Voice,
Damper Resonance ON/OFF, Master EQ Type,
Output Gain, I.A.Control, I.A.Control Depth,
MDB, Song Volume, Transpose, Tuning, Split
Point
Data that cannot be changed during the
Song recording
Style Number, ACMP ON/OFF, Smart Chord set-
ting, Style Volume, Chord Fingering, Touch
Response, Time Signature
DGX-660 Owner's Manual
45