Advertisement
Figure 2
Figure 3
Figure 4
Figure 5
REFITTING COALS
6
Place the front base coal in the
burner compartment so that it rests
on the ledges at the sides and front.
Pull the coal forward so that it is
immediately behind the front rim
of the burner compartment
(Figure 2).
Place the rear base coal in the
burner compartment behind the
front coal. It should rest on the
ledge at the back of the burner
compartment and its rear face
should touch the rear ceramic wall
(See figure 3).
Placing The Dress Coals
Install the 9 loose coals as follows.
The smooth surfaces of the coals
should be at the bottom and back.
Select the smallest coals and put
them aside until all the other coals
are installed. Place four of the
medium size coals in the four
valleys of the front coal. (See
Figure 4).
Please the three remaining medium
size coals behind the and
approximately midway between
each of the coals in the front row.
(See Figure 5).
Advertisement
