Refitting Coals - Valor BR419 VA Owner's Manual

1.
Fit the ceramic rear wall into the bracket at the back
of the firebox .See figure 4.
2.
Place the rear base coal in the firebox. It should rest
on the ledges at the sides and back of the firebox and its
rear face should touch the rear ceramic wall. See figure
5.
3.
Place the front base coal in the firebox with its bottom
front locating over the front rim of the firebox. Pull the
coal forward so that it locates immediately behind the
front rim of the firebox. See figure 6.
4.
There are two types of loose coals. These are
identified with the letter "A" or "B" on the
underside of the coal.
There are three "A" coals and two "B" coals.
OWNER'S GUIDE
R E F I T T I N G C O A L S
Page 10
Figure 4 Ceramic Rear Wall
Position
Figure 5 Rear Base Coal Position
Figure 6 Front Base Coal
Position