Fitting The Ceramic Coals - Valor LIMOUSIN BR627 Owner's Manual

7.1 Place the
front base coal
in the burner
compartment so
that it rests on
the ledges at the
sides and front. Pull the coal forward so
that it is immediately behind the front
rim of the burner compartment See
figure 4.
7.2 Place the
rear base
coal in the
burner
compartment
behind the
front coal. It
should rest
on the ledge
at the back
of the burner
compartment
The
Fig. 5 Rear base coal
projections
at the sides
of the rear coal should touch the front
coal. See
figure 5
.
7.3 Place
one of the
loose coals
from the
bag in the
Fig. 6 First loose coal
centre of
the front base coal. Make sure that it
bridges the space between the front and
rear base coals. See figure 6.
OWNER'S GUIDE

FITTING THE CERAMIC COALS

Fig. 4 Front base coal
7.4 Place
two coals
each side
of the
centre
loose coal.
Make sure
that they
bridge the space between the front and
rear base coals. See figure 7.
7.5 Place
a loose
coal behind
the central
coal in the
front row
central and
resting on the two peaks of the rear
base coal. See figure 8.
7.6 Place
two coals
each side
of the
centre
loose coal
and
immediately behind the front row of
coals. See
figure 9.
7.7 Place
two of the
remaining
coals each
side of the
central peak at the rear of the base coal
and immediately behind the second row
of coals. See figure 10.
Page 9
Fig. 7
Fig. 8
Fig. 9
Fig.10