Advertisement
DON'T SMOKE
EXTINGUISH ALL NAKED FLAMES
DON'T TURN ELECTRICAL SWITCHES ON OR OFF
TURN OFF THE GAS SUPPLY AT THE METER
OPEN DOORS AND WINDOWS TO GET RID OF THE GAS
IMMEDIATELY CALL THE GAS EMERGENCY SERVICE – SEE YOUR
LOCAL TELEPHONE DIRECTORY
1. As with any gas appliance, this fire
must be installed by a competent
person (in the United Kingdom
registered with CORGI).
In the United Kingdom, installation
must be in accordance with the
latest edition of the Gas Safety
(installation & use) Regulations.
In the Republic of Ireland,
installation must be in accordance
with all national and local
regulations in force.
2. If the fire is intended to be installed
to a chimney which was previously
used for solid fuel, the chimney must be swept prior to installation.
3. The fire must not stand on carpets or other combustible materials. The fire must
stand behind a non-combustible hearth surface. The hearth material must be at
least 12mm thick. Its top surface should be 50mm above floor level to discourage
placing carpets, rugs or other combustible materials over it. The minimum size of
the hearth is shown in figure 1.
4. If the fire is intended to be installed against a wall with combustible cladding, the
cladding must be removed from the area covered by the outer surround.
OWNER'S GUIDE
SAFETY
IF YOU SMELL GAS
Figure 1 Hearth minimum dimensions
Page 4
Hide quick links:
Advertisement
