Advertisement
6.
Place a type "A" coal between
the front and rear base coals with the
letter "A" upright and so that the coal
is against the left side of the firebox.
See figure 6.
7.
Place a type "B" coal between
the front and rear base coals as shown
in figure 7. The letter "B" should be
upright.
8.
Place a type "A" coal between
the front and rear base coals with the
letter "A" upright. The top of the coal
should rest against the centre coal of
the rear base coal as shown in figure
8.
9.
Place the remaining type "B"
coal at the right side of the firebox
between the front and rear base coals.
The letter "B" should be upright. The
coal should touch the right side of the
firebox. See figure 9.
10.
Place the remaining type "A"
coal between the front and rear base
coals. The letter "A" should be
upside down with its rear face
between the right and centre coals of
the rear base coal. Angle the coal so
that the gap between it and the type
"B" coal to its right is appreciably
larger than the gap between it and the
type "A" coal to its left but do not
have it touching the type "A" coal.
This will give the best flame effect.
See figure 10.
OWNER'S GUIDE
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Page 9
Hide quick links:
Advertisement
