Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Stand Upper Post Installation (cont.)
With the height adjustment cap screw on the
upper post facing the right side of the
tensioner, align the four (4) holes in the upper
post flange with the holes in the tensioner
base. Secure the flange to the base with the
four cap screws and flat washers.
Height Adjustment
The turntable height of the Gamma 7000ES
is adjustable from 39" to 46". To change the
height, remove the socket head cap screw
from its current position and place it in the
appropriate hole to set the desired height of
the machine.
Installing the Turntable
Insert the center post of the turntable into the
bearings of the stringing machine base. Make
sure that the turntable brake is not engaged
before installing the turntable.
5
Advertisement
Table of Contents
