Getting Started; Parts List; Preparation - THORLABS LDC200C series Operation Manual

LDC200C Series

2 Getting Started

2.1 Parts List

Inspect the shipping container for damage.
If the shipping container seems to be damaged, keep it until you have inspected the contents
and you have inspected the LDC200C Series controller mechanically and electrically.
Verify that you have received the following items within the package:
1. 1 LDC200C Series controller
2. 1 power cord, connector according to ordering country
3. 1 operation manual
4. 1 connection cable CAB400

2.2 Preparation

Prior to operate a LDC200C Series controller, check if the set line voltage matches with your
local power supply and if the appropriate fuses are inserted. (See sections
and Replacing the Mains Fuses
20
Connect the unit to the power line using the supplied cable. Turn the unit on by pressing the
line switch (F10) .
9
If required, the chassis ground can be connected to ground potential via the connector jack
(R5). The ground pin of the laser diode is internally connected to chassis ground.
8
)
21
Line Voltage Setting
© 2015 Thorlabs