Copying Phrases - Technics SX-KN7000 Operating Instructions Manual

Part III

Copying phrases

You can copy the desired data, as phrases, from the SEQUENCER to each pad memory of a "User
Bank".
• Chord data also can be copied to pad buttons 5 and 6 (SOLO).
PHRASE COPY
Copy a phrase from one pad to another.
1.
Press the PROGRAM MENUS button to turn
it on.
PROGRAM
MENUS
• The display looks similar to the following.
2.
Select PERFORMANCE PADS.
• The display looks similar to the following.
3.
Select PHRASE COPY.
• The display looks similar to the following.
4.
Select the pad you wish to copy from.
• Use the buttons on the FROM side to set the
desired settings.
BANK: Bank name
PAD: Pad number (1 to 6)
5.
Select the pad you wish to copy to.
• Use the buttons on the TO side to set the
desired settings.
USER BANK: Bank name (USER A, B, C)
PAD: Pad number (1 to 6)
• Only a SOLO phrase can be copied to the
SOLO pads (5 and 6).
6.
Press the OK button.
7.
Press the PROGRAM MENUS button to turn
it off.
• If you wish to modify a portion of the copied
phrase, press the EDIT button to change to
the recording display.
Performance Pads
69
QQTG0671