Playback - Technics SX-KN7000 Operating Instructions Manual

Part V
DSP SET
Press the DSP SET button if you wish to make
detailed settings for the ACCOMP DSP effect.
• Two types of DSP can be used for the auto-
matic accompaniment.
• You can specify whether or not to apply DSP1
to each part or to apply it to all the automatic
accompaniment parts.

Playback

1.
In the RHYTHM GROUP section, press the
MEMORY button.
RHYTHM GROUP
8 & 16 ROCK JAZZ &
BEAT & POP BALLAD SWING
MODERN SOUL & COUNTRY
60s & 70s
DANCE R&B & WESTERN
• The display looks similar to the following.
2.
Select the desired memory (A/B/C).
3.
Use the VARIATION buttons to select a var-
iation.
4.
Press the START/STOP button.
• The DRUMS part begins to play back.
• The BASS and ACCOMP parts are played
back when you use the AUTO PLAY CHORD.
MOVIE &
BALLROOM SHOW ENTERTAINER ORGANIST
MARCH LATIN
CUSTOM MEMORY
& WALTZ & WORLD
LOAD
Use the DSP L and M buttons to select the
1.
DSP type.
2.
Use the GROUP and TYPE
to select a group and type.
∧ ∨
3.
Use the VARI and
IATION ON or OFF.
• Use the DSP1 MODE button to select the
DSP1 mode.
SOUND MODE:
DSP1 can be applied to each part.
TOTAL MODE:
DSP1 is applied to all the parts.
• If the ALLOCATION MODE of EFFECT is set
to SEQ, these DSP effects cannot be used for
the automatic accompaniment. (Refer to page
163.)
Composer
∧ ∨
and buttons
buttons to select VAR-
115
QQTG0671