Technics SX-KN7000 Operating Instructions Manual page 107

Part IV
ADVANCE/DELAY
Speed up or delay the sound production of
specified performance data.
∧
1.
Use the TRACK and
track you wish to edit.
• You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEASURE
to specify the start point (measure number) of
the change.
3.
Use the LAST MEASURE
specify the end point (measure number) of the
change.
4.
Use the ADVANCE/DELAY
to accelerate or delay the timing of the sound
production (– 96 to +96).
• A + value causes the notes to sound later, and
a – value causes the notes to sound earlier.
5.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
∨
buttons to select the
∧ ∨
and buttons
∧ ∨
and buttons to
∧ ∨
and buttons
Sequencer
107
QQTG0671