Part X
FILTER ENVELOPE TOUCH & KEY FOLLOW
Specify how the filter envelope (curve) changes
relative to touch or note pitch.
1.
Use the PAGE buttons to view the 4/4 display.
• The display looks similar to the following.
2.
Use the buttons to the left of the display to
select a tone.
Amplitude Edit
Adjust the settings related to the volume of the sound.
LEVEL
1.
On the SOUND EDIT menu, select AMPLI-
TUDE.
• The display looks similar to the following.
2.
Use the buttons to the left of the display to
select a tone.
∧
3.
Use the LEVEL
and
volume.
∧
4.
Use the TOUCH
amount of volume change in relation to how
hard the keyboard is played.
• At a – value, the softer the keyboard is played,
the louder the sound. At a + value, the harder
the keyboard is played, the louder the sound.
∧
5.
Use the CURVE
and
type of volume curve depending on touch.
172
QQTG0671
∨
buttons to select the
∨
and
buttons to set the
∨
buttons to select the
∧
3.
Use the TOUCH
and
how the respective filter envelopes change
relative to touch.
∧
• Use the TIME
and
time change, and the LEVEL
to specify the level, relative to touch.
• At a – setting, the softer the keys are played,
the greater the change. At a + setting, the
harder the keys are played, the greater the
change.
4.
Use the ENVELOPE KEY FOLLOW
buttons to modify how the respective filter en-
velopes change relative to note pitch.
• Adjust the respective slopes for attack (ATK),
decay (DCY) and release (RLS). Use the CEN-
∧
∨
TER
and
buttons to specify the center of
the bend slope by note name.
6.
Use the LEVEL KEY FOLLOW
tons to change the respective key follow set-
tings.
∧
• Use the SLOPE
and
bend slope. Use the RANGE
to specify the pitch range by note name.
7.
Repeat steps 2 to 6 for the other tones, as
desired.
Sound Edit
∨
buttons to modify
∨
buttons to specify the
∧
∨
and
buttons
∧
∨
and
∧
∨
and
but-
∨
buttons to adjust the
∧
∨
and
buttons