Panel Memory Output; Computer Connection - Technics SX-KN7000 Operating Instructions Manual

Part XIII

Panel Memory Output

These are settings affect the transmission data when the PANEL MEMORY buttons are operated.
1.
On the MIDI MENU display, select PANEL
MEMORY OUTPUT.
• The display looks similar to the following.
∧
2.
Use the P.MEM and
PANEL MEMORY number.
∧
3.
Use the OFF/ON
whether the data in the selected PANEL
MEMORY number is transmitted or not.
∧
4.
Use the PART and
part (RIGHT 1, RIGHT 2 or LEFT).

Computer Connection

These settings are used to select the mode related to MIDI signal flow when a personal computer is
connected to the USB terminal of this instrument.
• When connecting to a personal computer, install the USB driver on the included CD-ROM to the
computer first. (Refer to the separate manual for more information.)
1.
Turn off the power to this instrument.
2.
Connect a personal computer to the USB ter-
minal on the rear of this instrument.
3.
Turn on the power to this instrument.
4.
On the MIDI MENU display, select COM-
PUTER CONNECTION.
• The display looks similar to the following.
∧ ∨
5.
Use the and buttons to select a mode.
196
QQTG0671
∨
buttons to select a
∨
and buttons to specify
∨
buttons to select a
5.
Use the PRGRAM CHANGE
to specify a program change number (0 to 127,
or OFF).
∧
6.
Use the BANK LSB
a BANK LSB (0 to 127).
∧
7.
Use the BANK MSB
a BANK MSB (0 to 127).
∧
8.
Use the VOLUME
the volume (0 to 127, or OFF).
9.
Repeat steps 4 to 7 for each part, as neces-
sary.
10.
Repeat steps 3 to 9 for each PANEL MEMORY
number, as necessary.
NORMAL:
Ordinary mode
PC as master:
The mode which is appropriate for data trans-
mission
KN as master:
The mode when this instrument is used as the
master keyboard.
KN as slave:
The mode when this instrument is used as a
slave instrument.
INTERFACE:
The mode when this instrument is used as a
connecting device between a PC with only
USB terminals and an instrument with only
MIDI terminals.
MIDI
∧ ∨
and buttons
∨
and buttons to specify
∨
and buttons to specify
∨
and buttons to specify