Night Vision - ATN BINOX HD Operator's Manual

3 . 01. N I G H T V I S I O N
3-2
To switch between Day and Night Mode
you should choose NIGHT MODE in
Shortcuts .
Shortcuts allows you quick access to the
Carousel that contains quick access to your
units features . Just click on the CENTER
button to access the Carousel .
Buttons highlighted in Red are the only
ones that activate a particular shortcut .
Movement between the items is carried
out using the LEFT & RIGHT buttons
NOTE
Remember that turning on Night
Mode during daylight will not harm
your device, however you may not be
able to see anything due to the image
being too bright.
You can choose preferred Сolor Theme
or adjust the Light Sensitivity in the System
Menu (Night Vision section) .
To enter the System Menu you should
open Shortcut Carousel with CENTER
button and select the wrench icon with
RIGHT or LEFT buttons
Then push CENTER button
the menu .
Select Night Vision in the Menu Tab .
Movement between the tabs is carried out
using the LEFT and RIGHT buttons
To s w i t c h b e t w e e n G r e e n a n d
Black&White modes follow the next few
steps . Select Color Theme subcategory
in Night Vision Tab by pressing UP and
DOWN buttons .
Then Press the CENTER button
select a particular value (once selected
it will turn red) . And choose Green or
Black&White mode, confirm it by pressing
CENTER button .
Night Vision category will be available
from the Shortcut Menu .
NOTE
Light Sensitivity does not change
when changing color modes.
.
.
to enter
.
to