Unpacking - ATN BINOX HD Operator's Manual

1. 01. U N PAC K I N G
The following steps must be accomplished prior to each mission where the device is used:
1 . Open packaging box, remove BinoX HD and check the contents
2 . Make sure that nothing is missing
3 . Inspect the device for damage to optical surfaces, body, eyecups, operation buttons, etc .
4 . Ensure that all optical surfaces are clean and ready for use .
NOTE
You must have a microSD card inserted in the device, in order to be able to update to the
latest firmware.
MICROSD, MICRO HDMI
& MICRO USB
ZOOM IN
POWER BUTTON
FOCUS
ADJUSTMENT
RING
1-2
START/STOP VIDEO
ENTER
RECORDING
BUTTON
IR BEAM FOCUS
ADJUSTMENT RING
ZOOM OUT
TAKE A PICTURE
DIOPTER
ADJUSTMENT
TRIPOD THREAD
BATTERY
HOUSING COVER