ATN BINOX HD Operator's Manual page 21

Pressing the CENTER button
take you to the Main Screen of the Range-
finder feature .
To measure the distance, follow the next steps:
1 . Put the arrow-mark on the top of the target and press the CENTER button
ular to take the readings (it will take a number of readings so try to keep your binocular steady);
2 . Put the arrow-mark under the target and press the CEN TER button
3 . If satisfied with the value press the LEFT button
steps 1 and 2 if necessary .
NOTE
During the measurement process, you can zoom in and out using standard buttons (UP
and DOWN).
If the Target Height is incorrect you can
change it:
• press the RIGHT button
the Menu;
• choose one of the presets or input
the height manually;
• accept the height with CENTER
button and go back to the Main
Screen .
will
to enter
;
to go back to the Homescreen or repeat
, wait for the binoc-
3-5