Replacement Battery Specifications; Battery Authorize Failed; Charging Options - Honeywell Dolphin 75E User Manual

Replacement Battery Specifications

Dolphin 75e model terminals are designed for use with battery part numbers BAT-STANDARD-02 (Li-ion 3.7V, 6.179 watt
hour) and BAT-EXTENDED-02 (Li-ion 3.7V, 12.358 watt hour) manufactured for Honeywell International Inc. For information
on how to replace the battery, see page 1-11.
Important Battery and Battery Door Replacement Guidelines
Follow the guidelines listed below when ordering batteries and/or battery doors.
• Size (e.g., standard or extended): The battery and battery door must be the same size.
• Type (e.g., locking or non-locking): Dolphin 75e models are only compatible locking type battery doors.
• Near Field Communication (NFC) requirements: Use only NFC compatible battery doors with NFC equipped Dolphin
models identified with the letter N at the end of the model number (e.g., 75exxN).
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
not covered by the warranty.
Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the
environmental rating of the terminal.

Battery Authorize Failed

If a "Battery Authorize failed" notification appears, replace the battery with a qualified Honeywell Li-ion battery pack. The
battery does not charge if authentication fails.
Start

Charging Options

Dolphin 75e terminals ship with the battery significantly discharged of power. Before using a terminal for the first time,
charge the battery with a Dolphin charging device for a minimum of 4 hours for the standard battery and 6 hours for the
extended battery.
When using the 70e-USB Charge/Communication cable to charge from a 500mA USB port on a host device, charge the
battery for a minimum of 6 hours for the standard battery and 8 hours for the extended battery.
Use one of the following chargers when the main battery is installed in the terminal:
• Dolphin 70e Black HomeBase (Model
• Dolphin 70e Black eBase (Model
• Dolphin 70e Black Mobile Base (Model
• Dolphin 70e Black ChargeBase (Model
• Dolphin 70e Black Net Base (Model
• Dolphin 70e USB Charge/Communication Cable (Model 70e-USB ADAPTERKIT) included with terminal,
To charge the battery when it is not installed in the terminal:
• Place the battery pack in the
70e Black eBase (Model
• Insert the battery in the QuadCharger (Model COMMON-QC),
70e-HB), see page
70e-EHB), see page
70e-MB), see page
70e-CB), see page
70e-NB), see page
Auxiliary Battery Well of the
70e-EHB).
Action Center
8-1
9-1
10-1
11-1
12-1
Dolphin 70e Black HomeBase (Model 70e-HB)
see page 2-1.
see page 1-13
or the Dolphin
2 - 9