Battery Swap Mode For Battery Replacement; Sleep Mode - Honeywell Dolphin CN80 Quick Start Manual

Battery Swap Mode for Battery Replacement

You should always place the computer in Battery Swap mode
before removing the battery. Battery Swap mode places the
computer in a low power state so that the battery can be
removed for a short time.
To activate Battery Swap mode:
1. Press and hold the Power button until the options menu
appears.
2. Touch Battery Swap and follow the on-screen instructions.
3. Once you replace the battery, press the Power button.

Sleep Mode

Sleep mode automatically turns the touch panel display off and
locks the computer to save battery power when the computer is
inactive for a programmed period of time.
1. Press and release the Power button to wake the computer.
2. Drag the
computer.
Adjust the Display Sleep Time
To adjust the amount of time before the display sleeps after
inactivity:
1. Touch
2. Select the amount of time before the display goes to sleep.
3. Touch
toward the top of the display to unlock the
> Settings > Display > Sleep.
to return to the Home screen.
13