System; Change The Terminal Name; Viewing Software And Hardware Information - Honeywell Dolphin 75E User Manual

System

Change the Terminal Name

To change the default terminal name:
1. In the Apps list, touch Settings
2. Select Edit name. The default name is Windows Phone.
3. Input a new name.
4. Select Save.

Viewing Software and Hardware information

To view basic software and hardware information:
1. In the Apps list, touch Settings
The Model, Software, and Installed RAM information appear under "Device information".
2. Select More info to view additional information including:
• Version number
• OS build number
• Firmware revision number
• Hardware revision number
• Bootloader version
• Radio software version
• Radio hardware version
• Chip SOC version
• Screen resolution
• MAC address
• IMS registration
Note: The More info button disappears once the list expands. The list stays expanded until you restart the terminal. When
you restart the terminal, the More Info button reappears and the detailed list is hidden.
To view detailed software and hardware information:
1. In the Apps list, touch DiagnosticInfoW10
2. Swipe up or down to scroll through the following:
• System Date/Time
• Device Information
• Honeywell Apps (version number)
• Radio Information (includes MAC, Bluetooth, IP Addresses)
• Battery Information
• Memory Information
• Scanner Information
3. If you want to export the diagnostic information to a text file, touch Save
4. Select a folder location and then touch
5. Change the file name. The default name is DiagnosticInfo.
6. Select Save , and then OK.
5 - 8
> System > About.
> System > About.
.
.
.