Storing Batteries; Guidelines For Battery Pack Use And Disposal - Honeywell Dolphin 75E User Manual

To set the battery saver to automatically turn on:
1. Scroll down to the bottom of the Battery saver screen and select Battery saver settings.
2. Check the box to automatically turn the battery saver on if the charge level drops below a set percentage.
3. Use the slider to set the battery level percentage.
To define apps you want to keep exempt from the Battery saver restrictions:
1. Select Battery saver settings.
2. Touch to add an app.
3. Select the app to exclude from the battery saver restrictions. Adding apps reduces the efficiency of the Battery
Saver.
Limiting Background Usage for a Specific Application
If you only want to adjust how a specific app consumes battery power by running in the background:
1. Select Settings > System > Battery saver.
2. Touch Battery use.
3. Select Change background app settings.
4. Select the On
Disabling the Button Backlights and Enabling the Smart Sensors to Conserve Power
To learn how to reduce power consumption by turning off the backlight on the terminal buttons, see
Button Illumination Settings
To learn about configuring the integrated motion detection sensors for advanced power management, see
the Sensor Settings on page

Storing Batteries

To maintain top performance from batteries, avoid storing batteries outside of the following temperature ranges:
• 14°F to 113°F (-10°C to +45°C) for short term storage of less than one month
• 32°F to 86°F (-0°C to +30°C) for long term storage
Do not store batteries in extremely high humidity. For prolonged storage, do not keep batteries stored in a charger that is
connected to a power source.

Guidelines for Battery Pack Use and Disposal

The following are general guidelines for the safe use and disposal of batteries:
• Do not disassemble or open crush, bend or deform, puncture or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other
liquids, expose to fire, explosion or other hazard.
• Improper battery use may result in a fire, explosion or other hazard.
• We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may pose a personal hazard
to the user.
• Only use the battery for the system for which it is specified. Do not use a battery in any other manner outside its intended
use in Dolphin terminals and peripherals.
• Only use the battery with a charging system that has been qualified with the system per standard IEEE-Std-1725-2006.
Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.
• Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725-
2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.
• Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.
• Never throw a used battery in the trash. Promptly dispose of used batteries in accordance with local regulations.
• Do not short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury. Do not allow metallic
conductive objects to contact battery terminals.
or Off toggle box to set background permission for the app.
on page 5-16.
5-16.
Changing the
Modifying
2 - 13