Chapter 6 - Communication; Wireless & Network Settings; Connecting The Terminal To A Wireless Network; Wi-Fi Network Connections - Honeywell Dolphin 75E User Manual

6
Communication
Wireless & Network Settings
In the Apps list, touch Settings
terminal On or Off and for configuring your network connections.

Connecting the Terminal to a Wireless Network

You connect the terminal to a wireless network through the on-board radios (802.11a/b/g/n/ac and/or Bluetooth). Each radio has
its own configuration settings and requires specific information about the wireless network to connect. A successful connection
depends on your network infrastructure so you may need to consult your network administrator before attempting a connection.
WLAN (802.11a/b/g/n/ac)
The Dolphin 75e has a 802.11a/b/g/n/ac WLAN (Wireless Local Area Network) radio. The radio is interoperable with other
802.11a/b/g/n/ac, Wi-Fi compliant products including access points (APs), workstations via PC card adapters, and other
wireless portable devices.
Bluetooth
See Working with Bluetooth and NFC Technology

Wi-Fi Network Connections

The Dolphin 75e supports Wi-Fi network connections for open or secure networks that use any of the following security
protocols: WPA/WPA2-Enterprise (PEAP, TLS and TTLS), WPA/WPA2-PSK (AES and Mixed-Mode), WEP, and OPEN. By
default, the terminal Wi-Fi radio is turned On.

Turning Wi-Fi Networking On or Off

1. In the Apps list, touch Settings
2. Select Wi-Fi.
3. Touch the toggle box to turn Wi-Fi networking On
4. If you turned Wi-Fi networking Off
choose in 1 hour, in 4 hours, in 1 day or manually.
You can also temporarily toggle the Wi-Fi On and Off by selecting the

Connecting to a Wi-Fi Network

1. In the Apps list, touch Settings
2. Verify the Wi-Fi networking is turned On
The terminal searches for available Wi-Fi networks within range. If the terminal previously connected to a Wi-Fi network,
it automatically reconnects to the same network.
3. Touch the network name you want to connect to from the available Wi-Fi network list.
4. If the network is secured, you are asked to provide information relevant to the network security protocol (e.g., password,
key, or certificate). Enter the required information.
5. Touch Done to connect.
> Network & wireless to access settings to turn the on board wireless radios in the
on page 7-1.
> Network & wireless.
or Off
, select when you want Wi-Fi turned back On
> Network & wireless >Wi-Fi.
.
.
. You have the option to
in the Action Center.
6 - 1