Variable Area (Setting Range) List - Omron E5CN Manual

SECTION 3 Communications Data for CompoWay/F and SYSWAY

3.1 Variable Area (Setting Range) List

The following table lists the variable areas. Items expressed in hexadecimal in the "Set (monitor) value"
column are the setting range for CompoWay/F communications. The values in parentheses are the
actual setting range. Use the values in parentheses as the setting range for SYSWAY communications.
When there is a section reference for a setting item, refer to that reference for details.
Vari-
able Address Parameter name
type
C0 0000 PV
C0 0001 Status (See note 1.)
C0 0002 Internal set point
(See note 1.)
C0 0003 Heater current 1 value
monitor
C0 0004 MV monitor (heating)
C0 0005 MV monitor (cooling)
C0 0006 Heater current value 2
monitor
C0 0007 Leakage current value 1
monitor
C0 0008 Leakage current value 2
monitor
C0 0009 Soak time remain moni-
tor
3-2
Setting (monitor) value
Temperature: Use the specified range for each sen-
sor.
Analog: Scaling lower limit −5% FS to Scaling
upper limit +5% FS
See 3.2 Status for details.
SP lower limit to SP upper limit
H'00000000 to H'00000226 (0.0 to 55.0)
Standard: H'FFFFFFCE to H'0000041A
(−5.0 to 105.0)
Heating and cooling: H'00000000 to H'0000041A
(0.0 to 105.0)
H'00000000 to H'0000041A (0.0 to 105.0)
H'00000000 to H'00000226 (0.0 to 55.0)
H'00000000 to H'00000226 (0.0 to 55.0)
H'00000000 to H'00000226 (0.0 to 55.0)
H'00000000 to H'0000270F (0 to 9999)
Level
Operat-
ing