Omron E5CN Manual page 46

Vari-
Ad-
able Parameter name
dress
type
C1 0019 Dead band
C1 001A Manual reset value
C1 001B Hysteresis (heating)
C1 001C Hysteresis (cooling)
C1 001D Heater burnout 2
detection
C1 001E HS alarm 1
C1 001F HS alarm 2
C1 0020 Soak time
C1 0021 Wait band
C1 0022 MV at stop
C1 0023 MV at PV error
Note: The alarm function can also be used in Controllers without alarm output terminals. In this case,
confirm alarm occurrences via the status data.
3.1 Variable Area (Setting Range) List
Setting (monitor) value
H'FFFFF831 to H'0000270F
(−199.9 to 999.9 for TC/Pt multi-input models)
(−19.9 to 99.99 for Analog input models)
H'00000000 to H'000003E8 (0.0 to 100.0)
H'00000001 to H'0000270F
(0.1 to 999.9 for TC/Pt multi-input models)
(0.01 to 99.99 for Analog input models)
H'00000001 to H'0000270F
(0.1 to 999.9 for TC/Pt multi-input models)
(0.01 to 99.99 for Analog input models)
H'00000000 to H'000001F4 (0.0 to 50.0)
H'00000000 to H'000001F4 (0.0 to 50.0)
H'00000000 to H'000001F4 (0.0 to 50.0)
H'00000001 to H'0000270F (1 to 9999)
H'00000000 (0): OFF
H'00000001 to H'0000270F
(0.1 to 999.9 for TC/Pt multi-input models)
(0.01 to 99.99 for Analog input models)
Standard: H'FFFFFFCE to H'0000041A (−5.0 to 105.0)
Heating and cooling: H'FFFFFBE6 to H'0000041A
(−105.0 to 105.0)
Standard: H'FFFFFFCE to H'0000041A (−5.0 to 105.0)
Heating and cooling: H'FFFFFBE6 to H'0000041A
(−105.0 to 105.0)
Level
Adjust-
ment
3-5