Variable Area (Setup Range) List - Omron E5AN User Manual

CHAPTER 3 COMMUNICATIONS DATA

3.1 Variable Area (setup range) List

Variable
Address
type
C0 0000 Process value
C0 0001 Status *
C0 0002 Internal set point *
C0 0003 Heater current monitor
C0 0004 MV monitor (heat)
C0 0005 MV monitor (cool)
* Not displayed on the controller display.
3--2
The following table lists the variable areas. Items expressed in hexadeci-
mal in the "Set (monitor) Value" column are the setting range in the Com-
poWay/F specifications. Values in parentheses "()" are the actual setting
range. (Refer to these values for the setting range in the Sysway specifica-
tions.)
For details of variable areas that are described not in numerical values but
by text, refer to the relevant parameter descriptions.
Item
Temperature: Follow the specified range of the sen-
sor.
Analog: Scaling lower limit -5%FS to scaling upper
limit +5%FS
See "4.2 Status."
SP lower limit to SP upper limit
00000000 to 00000226 (0.0 to 55.0)
Standard : FFFFFFCE to 0000041A (-5.0 to 105.0)
Heating and cooling: 00000000 to 0000041A
00000000 to 0000041A (0.0 to 105.0)
Set (monitor) Value
(0.0 to 105.0)
Level
Operation