NordicTrack E10 REAR DRIVE NTEVEL89909.2 User Manual page 18

HOW TO TURN ON THE POWER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before turning on the power. If you do not
do this, you may damage the console displays or
other electrical components.
Plug in the power cord (see
HOW TO PLUG IN THE
POWER CORD on page
14). Next, locate the
power switch on the frame
near the power cord. Make
sure that the power switch
is in the reset position.
The display will then turn on and the console will be
ready for use.
Note: When you turn on the power for the first time,
the ramp may calibrate automatically. The ramp will
move upward and downward as it calibrates. When the
ramp stops moving, the ramp is calibrated.
IMPORTANT: If the ramp does not calibrate auto-
matically, see HOW TO CALIBRATE THE RAMP on
page 23 and manually calibrate the ramp.
HOW TO USE THE MANUAL MODE
1. Begin pedaling or press any button on the
console to turn on the console.
See HOW TO TURN ON THE POWER above.
2. Select the manual mode.
Each time you turn
on the console, the
manual mode will
be selected. If you
have selected a
workout, reselect
the manual mode
by pressing any
of the Workouts
buttons repeatedly
until zeros appear
in the display.
3. Change the resistance of the pedals and the
Reset
Position
4. Follow your progress with the display.
18
incline of the ramp as desired.
As you pedal,
change the
resistance of the
pedals by press-
ing the Resistance
increase and
decrease buttons.
Note: After you press the buttons, it will take a
moment for the pedals to reach the selected resis-
tance level.
To vary the motion
of the pedals, you
can change the
incline of the ramp.
To change the
incline, press one
of the numbered
Quick Touch Ramp buttons.
Note: After you press the button, it will take a
moment for the ramp to reach the selected incline
level.
The lower left
display—This dis-
play can show the
elapsed time and
the distance (total
number of revolu-
tions) that you have
pedaled. Note: When a workout is selected, the
display will show the time remaining in the workout
instead of the elapsed time.
The lower right
display—This dis-
play can show your
pedaling speed
(in revolutions per
minute) and the
approximate num-
ber of calories that you have burned.