NordicTrack E10 REAR DRIVE NTEVEL89909.2 User Manual page 13

15. Attach the lower end of the Console (33) to the
Upright (5) with two M4 x 19mm Screws (156).
See step 13 on page 12. Tighten the M4 x
19mm Screws (156) in the upper end of the
Console (33).
16. Orient the Front Upright Cover (24) as shown.
Attach the Front Upright Cover (24) around the
Upright (5) by pressing the tabs on the Front
Upright Cover into the Rear Upright Cover (25).
17. Make sure that all parts of the elliptical are properly tightened. Note: Extra parts may be included. To
protect the floor or carpet from damage, place a mat under the elliptical.
15
33
16
25
5
13
156
5
156
24