Semi-Automatic Mode - CeraGem CGM MCB-1201 User Manual

3. How to use the product (by mode)

Semi-Automatic Mode

2
1
2
1
(Mode Duration: Approx. 18 minutes)
1. Turn on the remote control power and check the display.
- External projectors appear only when they are connected.
- The current temperature is displayed, and the standby state is shown.
2. Press the semi-automatic button and move the internal
projectors to the desired position.
- If you press the semi-automatic mode button, the semi-
automatic mode display will flash, and a buzzer sound will
be emitted.
- To change the mode, press the desired mode button once
more in 5-second standby state after pressing the mode
button.
3. The mode will automatically begin centered on the
designated position. Assume a proper body posture.
- Up and Down motion will begin centered on the selected point.
- When you move the internal projector, the moving projector display appears.
25