Adjusting The Temperature; Check The Current Temperature - CeraGem CGM MCB-1201 User Manual

2. How to use the remote control

Adjusting the Temperature

The temperature of the internal projector and external projector can be adjusted when the mode is
in use.
1 2
2
20

1. Check the current temperature.

- If you press the Internal/External projectors button for selection, the setting
temperature display for the projector will flash, and a buzzer sound will be emitted.
(The temperature is in standby state.)
2. Press the temperature key and set the temperature to
the desired level using the Up/Down button.
- The temperature can be adjusted by 1℃.
- If you do not press the button for 5 seconds in temperature standby state, the
temperature is converted into the current level when the temperature setting is
completed.
Pressing once (Internal projector temperature selected)
1
Pressing repeatedly (External projector temperature selected)
3. Check the changed temperature set point on the remote control
display.
- If you do not press the setting button after setting the temperature by pressing the
internal/external projectors' temperature, the temperature is converted into the current
level after the temperature display blinks for about 5 seconds.
Internal projector
30℃~65℃
External projector
30℃~60℃