CeraGem CGM MCB-1201 User Manual page 25

3. How to use the product (by mode)
Modes 3~9
1
24
(Mode Duration: Approx. 36 minutes 30 seconds)
1. Turn on the remote control power and check the display.
- External projectors appear only when they are connected.
- The current temperature is displayed, and the standby state is shown.
2. Select the mode by pressing the mode
- The mode display will show the mode number.
- To change the mode, press the desired mode button once more in 5-second standby
state after pressing the mode button.
2
3. The mode begins automatically, and body sensing
starts. Lie in the correct posture.
- When you move the internal projector, the moving projector display appears.
- During body recognition, internal projector position symbols will flash in order.
button (Modes 3~9).
Pressing repetition
(Modes 3~9 Sequential selection)