Semi-Automatic Mode - CeraGem CGM MB-1101 User Manual

* The duration of operation modes can vary depending on the body type of the user.
3. How to use the product (by mode)

Semi-automatic Mode

(Mode Duration: Approx. 18 minutes)
1. Turn on the remote control power supply and check the
display.
- External projectors appear only when they are connected.
- The current strength and temperature are displayed.
2. After pressing the semi-automatic mode key twice (once for Manual
mode), move the internal projectors to the desired position.
3. The mode will automatically begin centered on the designated
position. Assume proper body posture.
- The operating time is displayed on top of the body icon.
- Once the mode is complete, the buzzer will sound, and the remote
control will turn off.
- Refer to pages 21-23 for information on strength, temperature, and sound settings.
- Pressing the key once causes the current active mode to blink for
3 seconds. Pressing it again within 3 seconds changes the mode.
- If in Manual Mode, please note that the mode will be changed
immediately without blinking.
27