Automatic Mode (Mode 1) - CeraGem CGM MCB-1201 User Manual

3. How to use the product (by mode)

Automatic Mode (Mode 1)

1
22
1. Turn on the remote control power and check the display.
- External projectors appear only when they are connected.
- The current temperature is displayed, and the standby state is shown.
2. Select the mode by pressing the automatic mode 1 button.
- The mode display will show "1."
- To change the mode, press the desired mode button once more in 5-second
standby state after pressing the mode button.
2
3. The mode begins automatically, and body sensing
starts. Lie in the correct posture.
- When you move the internal projector, the moving projector display appears.
- During body recognition, internal projector position symbols will flash in order.
(Mode Duration: Approx. 36 minutes 30 seconds)