How To Use The Remote Control - CeraGem CGM MCB-1201 User Manual

2. How to use the remote control

Turning on the Remote Control
1 2
2
1
1. Check the condition of the product connections and press
the power key of the remote control.
- Start the remote control after opening the auxiliary part.
- Press the remote control for 2~3 seconds to turn it off.
2. Check the display on the remote control.
- External projectors appear only when they are connected.
- The current temperature is displayed, and the standby state is shown.
- Refer to pages 21~26 for the mode selection.
- Refer to page 20 for details on how to adjust the temperature.
3. Select the mode to be used.
19